Any error related to Kernel Data is usually caused due to a systems memory. Now, this could be your RAM or ROM, but whichever it is, it’s not healthy. In such a scenario, BSOD: Kernel Data Inpage Error is a common Windows response. But, the fact that it is related to your memory, makes it vulnerable to your data.
So, now we know the intensity of the problem, which means it is time for the big question, How to fix Kernel Data Inpage Error?
Well, folks, the Kernal Data Inpage Error is a BSOD, and no matter how dangerously annoying it is, the fixes are pretty simple. That is when you know the exact problem. Since all you get is a big blue screen and a bunch of texts with a few numbers on it, you will have to work this through.
- 1 What is Kernel Data Inpage Error?
- 2 How to fix Kernel Data Inpage Error?
- 3 Final Words
What is Kernel Data Inpage Error?
Other than being a BSOD, posing a huge threat to your Data and compromising your workplace, the Kernel Data Inpage Error is pretty well known. It is one of the few common BSOD errors reported by users. This error also appears under code 0x0000007A, 0xC000009A, 0xC000009C, 0xC000009D, 0xC000016A, 0xC000185.
The causes of this error are obviously related to your system’s memory, but there are a few.
- Corrupt Windows Files
- Malware Infection
- Faulty/Outdated Drivers
- Damaged Hard Disk
- Bad/Damaged Wiring
- Invalid BIOS Setting
Fixing the Kernel Data Inpage Error is not an issue, the problem is that the cause of the error is unknown. So in order to fix this problem, you will have to go through each and every fix one by one until it is resolved. But worry now as the fixes below are in a particular order to save your time.
How to fix Kernel Data Inpage Error?
Here are the best ways to Fix Kernel Data Inpage Error in Windows 10, 8 and 7.
1. Check Hardware
If you own a desktop, the very first step should be checking your cabinet and confirm that everything is fine. For starters, you can check your RAM or even unplug and re-install it just to be safe. Also, ensure that your SATA cable is properly connected to your hard drive and motherboard. If not, connect it properly and also inspect for any cut or loose in the wiring.
After confirming that your memory modules are installed and connected properly, boot your PC like you normally do.
If you own a laptop, skip this process for the repair show or for claiming the warranty of course.
2. Use Check Disk Command
The Check Disk command is a command run utility used to scan a specified drive for error. This command is designed to locate any file system error or bad sectors on your Hard Drive. If found, those errors or bad sectors, will either be repaired or isolated to keep your drive and data safe. It is usually recommended to use Check Disk commands once a month, to prevent an error like this.
- Start by opening Command Prompt as an admin. Press Windows+X and go to Command Prompt(admin).
- Now type in “chkdsk /your drive name” and press Enter. Example- If you want to check C drive then type chkdsk /c and hit Enter.
- Keep in mind that it won’t work until there is a background app running. So Press Y and Enter. This will reschedule the scan for the time when you reboot your PC.
- Now, Reboot your PC to start the scan.
3. Use SFC scan
The System File Checker or SFC is another command utility like Check Disk. This particular command helps you in taking care of the Windows file. Unlike chkdsk which only focuses or file system error or bad sectors, sfc scan all Windows file. If any file is found corrupter, or need to be repaired, SFC will instantly replace the damaged one with its original copy.
Yes, Windows have a backup for every file in system 32. It is like the Area 51 of Windows.
To use sfc scannow –
- Press Windows + X and click on Command Prompt(admin).
- Now, type in “sfc/scannow” and press Enter.
- This process takes some time, so be patient. Once the scan is complete, restart your PC and check if the problem persists.
4. Run Memory Diagnostic Tool
The memory diagnostic tool is an inbuilt Windows tool to check your RAM. Well, BIOS does check all of your Peripherals while POST or booting your PC however, it is really basic and only tests compatibility and functionality. But to really scan your RAM, you will need a tool like the Windows Memory Diagnostic Tool.
Using this tool will help you find any problem related to your RAM, which will also explain the Kernel Data Inpage Error.
- Go to Control Panel and search Memory.
- Then click on the Administrative tool to begin the diagnostic.
- This tool requires you to restart your PC. So, you can now either restart the computer and check the problem or schedule it for later.
- In case you get any error you can expect an RAM issue.
5. Update Windows Drivers
So far we have checked all our hardware for problems. But at this point, it is pretty sure that our memory components are not the problem. So what now? Well if it is not the memory, or Windows file or files error, then its either the Windows drivers or invalid BIOS setting.
If the Windows Driver is corrupted, damaged or incompatible, then a simple Windows update will solve this issue.
- Open Start and type”Windows Update“.
- Navigate through the menu and click on Update and Recovery.
- In the Windows Update menu, Click on “Check for Updates“
- Now click on Install Updates to download Windows updates.
- Restart your PC to install updates.
6. Update Drivers Using Device Manager
If Windows Update is not enough to satisfy you. You can also individually update any hardware driver in the Device Manager. Below is an example of how you can update your integrated GPU driver. By following the same method, you can also update other drivers as well.
In the Start menu search bar, type Device Manager.
- Under Device Manager, go to Display Adapters.
- Now right-click on your Display Adapters and click on Update Driver.
- Select “Search automatically for updated driver software“.
- Wait, till Windows find an update and download it automatically.
- After the installation restarts your PC and then check if the problem persists after.
7. Scan for Viruses
If incompatible or corrupted drivers was not the issue, then perhaps your system is infected with virus or most probably a Malware. Or even if it is not, what wrong will a simple PC scan will do, except taking a lot of time.
So, here is how you can scan your System for antivirus, with Windows in-built, homemade, ultimate super antivirus- The Windows Defender. (Not a big fan)
- Open Start menu and search Windows Defender.
- Now under Scan options and click on Full and Scan now.
- This process will take at least 5hrs so leave your PC for some time. Once the scan is complete, remove the infected files.
8. Restore BIOS Default
To be honest, everything should be fixed by now, but it is not. And, the only possible reason I can see for this error is your BIOS. In a nutshell, BIOS is the soul of your PC. It has all the superpowers to mess with your whole PC setting. Now BIOS doesn’t usually pose a problem unless-
- It is incompatible with your newly installed software or hardware.
- Somehow its default setting was changed.
If it’s the first, then uninstall it.
For the other one, here is how to fix-
- Reboot your PC and press F2 or Del key rapidly to access BIOS.
- After the BIOS is fully loaded, go to the setting and find Load Default Setting. You will actually have to find it. And Yeah, the mouse doesn’t work.
- After finding it, just press Enter and select Yes.
- Now Save your changes and Exit. Your PC will restart and the default BIOS setting will be restored, hopefully, fix the issue as well.
The Kernel Data Inpage Error is a problem, a big one actually. And to solve this issue you will probably have to go through all of these fixes. But, one thing for sure, after this article, it won’t be a problem anymore.
And, that concludes my article. I hope it was helpful to you. In case of any queries feel free to comment.
Thanks for reading this article, See you next time!