Fix Teredo Tunneling Pseudo-Interface on Windows 10

Hello, recently we have discovered that a lot of users are facing the issue of missing Teredo Tunneling Pseudo-Interface on windows 10,7. Most of them had installed the Microsoft Teredo Tunneling Adapter on their Windows 10 PC but they noticed Teredo Tunneling Pseudo-Interface is missing from the Device Manager.

Some of the users also got the device cannot start – Code 10. If you are also facing this issue. Just don’t panic here in this article we have prepared all the easy solutions to help you fix the issue of Teredo Tunneling Pseudo-Interface. We have also written some important information about the Teredo Tunneling Pseudo-Interface which will help you understand this term.

About Teredo Tunneling Pseudo-Interface

The interface provides a logical pathway connecting the program with a physical network port. For instance, Ethernet or Wi-Fi.

Similarly, pseudo-interface provides a logical pathway but encapsulates the traffic inside another packet construct before delivering out the port and this technique is called Tunneling.

Teredo is a tunneling technology made by Microsoft.

So a Teredo tunneling pseudo-interface is an interface that software uses to get access to a Teredo tunnel to get IPv6 connectivity on an IPv4-only network.

How To Fix Missing Teredo Tunneling Pseudo-Interface

If you are facing this issue then you must be wondering about how to fix this issue. The issue of Teredo Tunneling Pseudo-Interface could be unusual but can be fixed by the user himself. So here we have prepared the easy solution to help you fix this issue. If you want to fix this issue just apply one of the appropriate methods given below:

Note-: The image shown in the below methods are of windows 7 but all the methods also apply to Windows 10.

Let’s begin 🙂

Methode 1: Uninstall all Teredo Tunneling Adapters & Interfaces

Just follow the steps below to do it:

Step 1 Firstly press the Windows logo key and R simultaneously. Then Type devmgmt.msc and press Enter.

Step 2 Now Look for the Teredo Tunneling Pseudo-Interface under the category “Network adapters”.

Step 3 Do Right-click on the Teredo Tunneling Pseudo-Interface and select Uninstall.

Step 4 In case you see options such as Microsoft Teredo Tunneling Adapters( for instance, Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc. ), So uninstall them too.

Step 5 Now select Action at the top and click Add legacy hardware.

Step 6 Keep clicking the Next until you see the panel below:

Step 7 Select Network Adapter and click Next.

Step 8 Now choose the Microsoft option at the left panel. Then select Microsoft Teredo Tunneling Adapter at the right panel. Do click on the Next.

Method 2: Refreshing Teredo Service

Refreshing  Teredo service can also help you to solve this issue:

If you have no idea how to refresh Teredo Service just follow the instruction below:

Step 1 Firstly type CMD in the start panel searching box. Do Right-click on the CMD and select Run as Administrator.

Step 2 In the command prompt type following commands and press Enter after each of them.

netsh
int teredo
set state disabled


Step 3 Get into Device Manager again.


Step 4
 Expand Network adapter. Then  Do Right-click on the Teredo Tunneling Pseudo-Interface and select Uninstall.

Step 5 Run Command Prompt as administrator again.

Step 6 In the command prompt type following commands and press Enter after each of them.

netsh
int ipv6
set teredo client

Step 7 Now open Device Manager and select Scan for new hardware changes at the top.

Check if the device issue is fixed now.

Methode: 3 Use Third-party application

If your issue is still not solved. Then we recommend you to use a third-party application that would be able to help you fix this issue. You will get a lot of applications on the internet that can easily help you fix this issue. These applications can automatically search for errors and faults in your system and recover it by itself. So search it up on the Internet and fix the issue of Tunneling Pseudo-Interface which you are facing.

Conclusion

I hope this article was informative enough to help you fix the issue of the Teredo pseudo-interface. If your issue is still not fixed, then you might have done something wrong while using the above methods. Sometimes the manual fixing methods require advanced computer skills. So if you don’t have that much knowledge and skills then you should ask one of your friends to fix this issue who has advanced computer skills. Besides, If you don’t wanna fix this issue manually, just download any third-party software as we recommended in the third method that would fix your issue automatically.

If you have any other queries or suggestions to make, feel free to comment down below.

Leave a Reply